| BMW AD 3-in-1
Features:
BMW AD Interface including the function of BMW DASH /BMW INPA K+CAN /BMW SCNNER 1.40,3-in-1
1).BMW AD have the HITAG 2 features, Very easy you can program key or transponder to bmw vehicles equiped with CAS module. Programming key is required to have read eeprom of immobilizer, to load into the software to specify what position you want to program this key or transponder, and then modify the eeprom dump and program it into the immobilizer.Also you can read and program internal key memory where are stored ODOMETER, VIN.
Distinctive features of Hitag2 programmer:
ALL types of Hitag2 transponders are fully supported!
Widest range of supported cars, using Hitag2 protocol!
Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality!
Correct BMW key programming - RADIO REMOTE is working!
Supported transponder types:
PCF 7936
PCF 7941
PCF 7942/44
PCF 7943
PCF 7945
PCF 7946
PCF 7947
PCF 7952
Supported transponder modes:
Password mode
Crypto mode
Supported protocols:
Manchester
Biphase
Key generation from dump is available for the following cars:
support BMW (2002 -2009 years) CAS/CAS2/CAS3 DG512 / CAS3 + DP512
support matching BMW (2002 -2009 years) CAS/CAS2/CAS3 DG256 / CAS3 + DP512 key and remote control; the world's unique tec
2)BMW AD OBDII Connector have the K line and the CAN BUS system.can work the BMW DASH /BMW INPA K+CAN /BMW SCNNER 1.40 .
Supported Models:
1 Series: E81/E82/E87/E88
3 Series: E30/E36/E46/E90/E91/E92/E93
5 Series: E28/E34/E39/E60/E61
6 Series: E24/E63/E64
7 Series: E23/E32/E38/E65
8 Series: E31
X Series: X3-E83, X5-E53, X5-E70, X5-E71
Z Series: Z1-E30, Z3-E36, Z4-E85/E86, Z5-E52
MINI Series: MINI-R50/R52/R53/R55/R56/R57
Supported Systems:
All systems of BMW series and OBD-II diagnostic system, including:
Engine system
Auto Transmission
SRS
ABS
Cruise system
Air-condition system
EWS
LKE
BUS etc.
|
Contact
0086-0755-86219691
0086-13128865181
