| Please try twice if can't open the below documents at the first time.
Please contact for GM TECH 2 User Guide
GM Tech 2 now is with 2010 Software!
The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech-2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2010.
GM TECH-2 Features:
* Authentic GM software in the Tech-2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
* Support for on-board diagnostics on all GM systems 1992 thru current year.
* Removable hardware modules provide insurance against scan tool obsolescence.
* Large, easy-to-read backlit screen.
* RS232 & RS485 ports provide the avenue to connect future devices to your Tech-2 Flash.
* Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
* Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional:
The authentic GM 1992-current year software will provide full bi-directional controls when performing power train, chassis, and body diagnosis.
Vetronix Tech-2 Specifications:
|
Dimensions |
12" * 6" * 2" |
|
Microprocessor |
32 bit, 16 MHz |
|
Memory |
32 MB flash type II PCMCIA. Type III slot available for future expansion. |
|
Communications |
Integral RS232 communication port. |
|
Screen |
3.8?�2.8? backlit monochrome with full graphics capability: 320�240 pixels. Displays up to 9 vehicle parameters at once |
GM Tech-2 Starter Kit with CANdi Module & TIS Kit includes :
* Tech-2 Flash Tester
* CAN diagnostic interface module(CANdi)
* 32 MB PCMCIA Card with GM OE Applications
Kit of the cables:
1) 3000095-DLC cable
2) 3000096-Cigarette lighter power cable
3) 3000097-Battery power cable
4) 3000098-SAE 16/19 pin adapter (OBD2)
5) 3000099- NAO 12/19 adapter
6) 3000109-DLC loopback adapter (selftest)
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech-2 Flash and a CAN diagnostic interface module. The module connects between the Tech-2 Flash抯 diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
The following GM vehicles utilize the CAN interface:
* 05 Buick Allure (3.6L)
* 05 Buick LaCrosse (3.6L)
* 05 Buick Rainier (5.3L)
* 04-05 Buick Rendezvous (3.6L)
* 04-05 Cadillac CTS (3.6L)
* 04-05 Cadillac SRX (3.6L / 4.6L)
* 04-05 Cadillac XLR (4.6L)
* 05 Cadillac STS (3.6L / 4.6L)
* 05 Chevrolet Cobalt (2.2L)
* 05 Chevrolet Corvette (6.0L)
* 05 Chevrolet Equinox (3.4L)
* 05 Chevrolet TrailBlazer (5.3L)
* 05 Chevrolet SSR (6.0L)
* 04 Chevrolet Malibu (Body/Chassis only)
* 05 Chevrolet Malibu (3.5L)
* 05 GMC Envoy (5.3L)
* 05 Pontiac G6 (3.5L)
* 05 Pontiac GTO (6.0L)
* 05 Pontiac Pursuit (2.2L)
|
Contact
0086-0755-86219691
0086-13128865181
