|
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol .
Vehicles Coverage:
Available VW/AUDI/SEAT/SKODA from year 1996 to 2005, with KKL, K/L and single K-line modes without CAN-bus system.
Compatible with VAG-COM Release 311 and 409 software.
Audi Models:
- Compatible: A2 / A3 / A4 Cabriolet / A6 / A8 / S2 / S3 / TT
- Not Compatible: 80 / 100 / 200 / A3(8P) / A4(B7) / A6(C6/4F) / A8 / A8L(D3/4E) / Q7
SEAT Models:
- Compatible: Alhambra / Altea / Arosa / Cordoba / Ibiza / Inca / Leon MK 1 / Leon MK 2 / Toledo
- Not Compatible: Altea (5P) / Leon (1P) / Toledo (5P)
Skoda:
- Compatible: Fabia / Felicia / Octavia MK 1 / Octavia MK 2 / Superb
- Not Compatible: Octavia (1Z)
VW:
- Compatible: Beetle / Bora / Caddy / Corrado / Golf MK2 / Golf MK3 / Golf MK4 / Jetta MK3 / Jetta MK4/ Lupo / Passat MK3 / Passat MK4 / Polo MK3 / Polo MK4 / Touran / Touareg / Transporter T3 / Transporter T4 / Transporter T5.
- Not Compatible: Caddy (2K) / Golf MK5 (1K) / Golf Plus / Jetta MK5 (1K) / Passat MK5 (B6) / Passat MK6 (B6) / Phaeton / Touran (1T)
Reference Date:
1).This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
2). Terminal K = Bus of communication
3). Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
4). Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5). This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only.
6). Supported also ISO9141 protocol
7).The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
8). Product running as virtual comport, like many products it usees a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines.
9). Read & erase error code, log data e. g. speed, gasoline, consume engine-rotating(RPM: Rotation Per Minutes).
Package Contains:
1. 1 x VAG-COM cable
2. CD Driver
|
Contact
0086-0755-86219691
0086-13128865181
